Home » Products » DIAMOND WR300NSI 300Mbps 802.11n Wireless Repeater Range Extender Wireless Access Point & Wireless Bridge Device

DIAMOND WR300NSI 300Mbps 802.11n Wireless Repeater Range Extender Wireless Access Point & Wireless Bridge Device

$999.00

Out of stock

Wireless Repeater and Range Extender
Receives weak wireless signals and extends the signal range to greater distances eliminating wireless dead spots.

Standalone Wireless Access Point
Create a wireless network by connecting the device to a wired router/cable modem or DSL modem. This small compact portable device can create wireless connectivity where ever you go. Use in your hotel room and turn a wired internet connection into a wireless internet connection.

Wireless Bridge Device
Receives wireless signal from your home wireless network and convert to wired Ethernet connections for non wireless devices such as internet ready HDTV, Blue-Ray players, gaming consoles, and media players. WR300NSI is designed with RSSI indicators to determine the strength of wireless signal received from router to it. This helps users to place WR300NSI in the best possible location to repeat existing wireless signal.

Make Wired Network WiFi Ready

Out of stock

SKU: WR300NSI Categories: ,

Description

The Diamond Multimedia WR300NSI Portable Wireless-N Repeater supports wireless 802.11b/g/n standards with one 10/100Base-T Ethernet port.

The WR300NSI is designed with MIMO technology to extend the reach of any existing wireless router/AP to maximize the coverage in your home or office. It basically receives the signal from your wireless router/AP and repeats it to extend the range to farther locations that are previously unreachable.

Equipped with 64/128-bit WEP, WIFI Protected Access (WPA), and the latest WPA2 encryption with TKIP and AES algorithm to protect your wireless network from unauthorized access.

MAC Address Filtering for wireless links provides an additional layer of security for your wireless network.

The device comes with 1 x 10/100M Auto MDI/MDIx Ethernet port that can be used to connect to an existing wired network to serve as a wireless AP or wireless bridge. It can also be used to configure the device via its web-based GUI, or upgrade the firmware when connected to the Network Interface Card of your PC.

Protocol/Standards/Support: Wireless IEEE802.11n, IEEE802.11b/g Ethernet IEEE 802.3 10/100, IEEE802.3u, IEEE802.3ab
Network Support: OFDM 1024/256/64/16/8 QAM, QPSK, BPSK and ROBO Modulation Scheme Wireless
Security Support: Wireless: 64/128-bit WEP, WPA, WPA2
Operating System: OS Independent with TCP/IP protocol installed
Max Current: 0.12 A
Voltage Rating: 100 – 240V AC (50-60 Hz)

General Product Information
Product Dimension : 4.1 x 2.3 x 1.6 inches
Package Dimension : 9.0 x 7.0 x 3.25 inches
Product Weight : .30 lbs
Weight with Content : 1.0 lbs
SKU : WR300NSI
UPC : 757448022445

Package Content:
Diamond WR300NSI
LAN Cable
Utility Disk
Quick Start Guide

System Requirements

Operating System : WIN 8, WIN 7 32 , WIN 7 64, WINVISTA32 , WINVISTA64, WINXP , WINXP64, WIN2000 , WIN2003, MCE, LINUX32, LINUX64, MAC OS X
Hard Disk Space : 10 MB
CD/DVD : YES
Power Consumption : 4W

California Health & Safety Notice
The solder used in this product contains lead, a chemical known to the State of California to cause birth defects and other reproductive harm. Please wash hands after handling internal components and circuit boards and avoid inhalation of fumes if heating the solder.

Support & Downloads

Quick Start  Guide

WIN® 8, WIN® 7 32 , WIN® 7 64, WIN® 2008, VISTA® 32, VISTA® 64,WIN® XP,  WIN® XP 64, MCE®,   WIN® 2000,WIN® 2003, WIN® NT, WIN® 98SE, WIN® ME, LINUX 32,  LINUX 64, MAC OSX®

 
User guide in PDF format

WIN® 8, WIN® 7 32 , WIN® 7 64, WIN® 2008, VISTA® 32, VISTA® 64,WIN® XP,  WIN® XP 64, MCE®,   WIN® 2000,WIN® 2003, WIN® NT, WIN® 98SE, WIN® ME, LINUX 32,  LINUX 64, MAC OSX®

Proposition 65 WARNING

Prop 65 Warning