Manual Driver installation

/Manual Driver installation

Manual Driver installation

You can open the device manager by following these instructions: http://windows.microsoft.com/en-us/windows/open-de…

If you see a device listed as an “OTG102” please try and re-install the driver from the disk. If this does not solve the issue you will need to go into your device manager and manually update your driver. Please follow the steps below.

Please be sure that the included CD is in the optical drive, or substitute the location in step 5 with the location of the downloaded file

1) Go into device manager with our device plugged in and locate the “E-home Infrared Receiver” device under “Universal Serial Bus Controllers” or the “OTG102” device under the “Other” category. Once you have located it right click on it and select the “Update Driver Software…” option from the shortcut menu.

2) Once the update window opens, select the “Browse my computer for driver software” option. That will take you to a screen with a location and a “Browse” button.

3) Below the location bar, there is an option labeled “Let me pick from a list of device drivers on my computer” That will take you to a list of compatible drivers

4) Below the list, on the right hand side, click on the button that says: “Have Disk…” That will open up another window with a location bar and a browse button.

5) Click on the browse button, and a file browser window will open. Click on the “computer” option on the left side and double click on your CD or DVD drive.

6) On the disk are several folders, one of them should be labeled “Driver” head into that folder and you should see a couple more folders.

7) The next folder you select is determined by you version of windows. If you are using a 64 bit Version of windows, then you want to select the “X64” folder. If you system is 32 bit, the you want to select the “X86” Folder.

8) The next folder will be an “inf” folder. Either “x64inf” if you are using a 64 bit version of windows or an “x86inf” if you are using a 32 bit version.

9) In the folder there are 2 files the “CxplrCap.inf” and “maxcir.inf”. Choose the “CxplrCap.inf” and press “open” and then “OK”

10) Once back to the windows with the list and click “next”. Windows should then install the proper driver, and an “OTG102” should show up in the device manager as an “Other Device”

11) Right click on the “OTG102” and select the “Update Driver Software…” option from the shortcut menu.

12) Once the update window opens, select the “Browse my computer for driver software” option. That will take you to a screen with a location and a “Browse” button.

13) Click on the browse button, and a file browser window will open. Click on the “computer” option on the left side and double click on your CD or DVD drive.

14) Once back onto the disk select the driver folder and press “OK” Then click “Next”.

15) The driver should install and the correct drivers for the VC500 device should be installed. You can double check by looking under “Sound, Video, and Game Controllers” for a “USB2.0 Video Capture Device” and a “USB2.0 Audio Capture Device”.

Let us know if you have any other questions or problems with the Process, we’ll be glad to help.

2018-05-31T15:40:13-07:00May 31st, 2018|0 Comments